Poliseal EFM
Long lasting interior and exterior wood protection and fire-retardant coating
Passes Class A – ASTM E84. Flame spread and Smoke Emission test
Low odor, easy handling and clean-up, environmentally safe
Allows wood to retain its natural look
USAGE: WATERPROOFING, PROTECTIVE COATING
Long lasting interior and exterior wood protection and fire-retardant coating
Passes Class A – ASTM E84. Flame spread and Smoke Emission test
Low odor, easy handling and clean-up, environmentally safe
Allows wood to retain its natural look
USAGE: WATERPROOFING, PROTECTIVE COATING
Long lasting interior and exterior wood protection and fire-retardant coating
Passes Class A – ASTM E84. Flame spread and Smoke Emission test
Low odor, easy handling and clean-up, environmentally safe
Allows wood to retain its natural look
USAGE: WATERPROOFING, PROTECTIVE COATING
POLASEAL EFM is a water-based, single component, water repellent treatment specifically designed to protect exterior wood surfaces. It penetrates the wood and then cures by reaction with air to lock itself into the pore structure of the wood. POLASEAL EFM contains a proven fire retardant to reduce flame spread in the event of a fire, and a blend of special preservatives to fight against the causes of decay.
Outstanding Features
Provides protection from water penetration and fire damage
Nochar (R), a proven flame retardant, and a blend of water repellents and anti-oxidants
Resists breakdown from UV rays, microbiological activity, pollutants and chemicals
Actives will not evaporate, migrate, or wash away after treatment
Allows the treated surface to breathe, preventing water entrapment
Repels water, contains active fungicides, and retards rot and aging discoloration on wood
Low odor, very low toxicity, easy handling and clean-up, environmentally safe
Improves the dimensional stability of wood and fiber composites
Allows wood to retain its natural look
Recommended for
Can be used over wood, wood composites and other surfaces.
Coverage
Approximate 100 to 200 sq ft/gal, depending upon substrate
Container sizes
1 gallon, 5 gallon
Color
Transparent
Sealer type
Water-based siloxane
Surface Preparation
POLASEAL EFM is designed as a single coat treatment; however, a 2nd coat is often beneficial for some types of wood. Surfaces to be treated must be clean and free of loose debris, dirt, mildew, oils and grease. The surface may be damp but not wet. A dry surface is preferable since it will allow maximum penetration of POLASEAL EFM into the substrate. Previously painted, stained or treated surfaces may reduce treatment penetration. It is advisable to do a test area on previously treated wood surfaces to assure adequate performance.
Application
Apply EFM by brush, roller or low pressure spray technique. Brush and roller techniques are more effective in aiding the product penetration of the wood surface. Fully saturate the surface with POLASEAL EFM.
When spraying a vertical area, apply enough material to generate a slight rundown of product. For a horizontal surface, start at one edge and work backward toward the opposite edge, applying enough POLASEAL EFM to saturate the surface. The wood surfaces must be permitted to dry after treatment for proper cure to take place. Full cure develops over a 2 week period.
Spray Application
For spray applications, use HVLP spray equipment.
Clean up
Clean tools immediately after application with water.
Limitations
Any previously tested, stained or painted surface must have a test application to assure compatibility. A test application is also recommended if exact coverage figures are required. Thoroughly stir or shake EFM before using. Do not apply to a frosted or saturated surface. Do not apply if precipitation is forecast within 8 hours. Do not spray in strong wind conditions. It is strongly advised to protect adjacent shrubbery from overspray. Overspray will not affect most glass, metal or painted surfaces if removed shortly after application. Remove any overspray from glass, metal or vinyl surfaces immediately after application by wiping with a damp cloth, followed by wiping with glass cleaner.
Read the container label warning and Safety Data Sheet (SDS) for important health and safety information prior to the use of this product.
KEEP AWAY FROM CHILDREN AND PETS